Skip to content

Choosing sliding door hardware by weight and material

Choose sliding door hardware from the door: its finished weight, material and thickness, then the opening size and how the track is mounted. Each fitting has a maximum door weight for a given material. In Hawa's published data, Hawa Junior 80Z carries wooden doors up to 80 kg, and Hawa Junior 250G glass doors up to 250 kg.

Published by BSI on 31 October 2026

Start with the door, not the track

Sliding hardware is selected for the leaf it carries. Four facts settle most of the choice: the weight of the heaviest leaf, its material (wood, glass or metal), its thickness, and where the track is fixed: to the wall, to the ceiling or recessed into the ceiling. The movement comes next: a single sliding door, a telescopic or symmetric set, a folding wall or a furniture front.

The hardware and the door are separate responsibilities. EN 1527, the European standard for hardware for sliding and folding doors, sets requirements for the hardware of manual sliding doors, sliding corner doors and folding doors, and excludes the doors and panels themselves. The door maker answers for the leaf; the hardware has to be rated for it.

Weight classes in the Hawa range

Hawa publishes a maximum door weight, a door material and a thickness range for each fitting. In the Hawa Junior line, the number in the model name matches the maximum door weight in kilograms. The examples below are paraphrased from Hawa's product data; check the current data sheet for your project before ordering.

Examples from Hawa's published product data
FittingDoor materialMaximum door weightDoor or glass thickness
Hawa Junior 40BWood40 kg35–80 mm
Hawa Porta 60 HWood60 kg30–80 mm
Hawa Junior 80ZWood80 kg35–80 mm
Hawa Junior 80GSGlass80 kg8–12.7 mm glass
Hawa Junior 120BWood120 kg35–80 mm
Hawa Junior 120 GPGlass120 kg8–12.7 mm glass
Hawa Junior 160AWood160 kg35–80 mm
Hawa Junior 250GGlass250 kg8–16 mm glass
Hawa Super 500Solid wood500 kgPer data sheet

The same weight class comes in separate versions for wood and for glass, so material is part of the selection, not a detail. Size limits apply as well: for Hawa Junior 80Z, Hawa lists a maximum door height of 4,000 mm and a maximum width of 3,000 mm.

Work out the real door weight

  • Weigh or calculate the finished leaf, including facings, glazing inserts, handles, locks and seals, not the bare core.
  • For glass doors, take the weight of the exact glass build-up from the glass supplier.
  • Where a door falls close to the limit of a class, move up to the next class.
  • Check the door thickness against the fitting's range, and the height and width against its size limits.
  • For heavy timber doors beyond the Junior range, Hawa Super is the heavy-duty family: Hawa lists Hawa Super 500 for solid wooden doors up to 500 kg.

Soft closing: the “hydraulic” track

In Saudi searches, people often ask for a “hydraulic” track (سكة هيدروليك) when they mean a door that slows down and closes gently. On Hawa Junior fittings this is an optional soft and self-closing mechanism: for the Junior 80 models, Hawa lists SoftMove 80, integrated into the running track. Because it sits in the track, include it when you specify the hardware.

Acoustic, barrier-free and push-to-open options

The Hawa sliding door range includes acoustic versions, Hawa Junior Acoustics and Hawa Porta Acoustics, as well as options for barrier-free sliding and push-to-open. An acoustic sliding door is a tested door assembly: ask for the test data of the exact combination of door, seals and hardware rather than a figure for the hardware alone.

Walls, furniture and façades

The same questions apply beyond doors. Folding and stacking walls run on Hawa Variofold, Centerfold, Variotec, Aperto or Shopfront; furniture fronts on Combino, Frontino, 220 Planfront, Clipo, Regal, Libra or the Concepta pivot-slide-in systems; façade shutters on Hawa Frontslide, Frontfold and Frontego. In each case, panel weight, material and mounting decide the series.

Questions, answered.

How do I choose a sliding track for a 100 kg wooden door?

Pick a fitting rated for wooden doors above the finished leaf weight, then check the door thickness and size limits. In Hawa's published data, Hawa Junior 120B carries wooden doors up to 120 kg and Hawa Junior 160A up to 160 kg, both for doors 35–80 mm thick. Weigh the finished leaf with its handles, lock and seals before choosing.

What does a “hydraulic” sliding door track mean?

It is the local name for a soft-closing track: a mechanism that slows the door and closes it gently. On Hawa Junior fittings it is an optional soft and self-closing mechanism, SoftMove 80 for the Junior 80 models, integrated into the running track.

Do wood and glass doors use the same fitting?

Within a weight class, Hawa publishes separate versions for each material: Hawa Junior 80Z for wooden doors and Hawa Junior 80GS for glass doors, for example, each up to 80 kg. Choose the version that matches your door material and thickness.

Sources

  1. BSI company profile p.19
  2. BSI company profile p.20
  3. Hawa Sliding Solutions, published product data for Hawa Junior 40B, 80Z, 80GS, 120B, 120 GP, 160A and 250G, Hawa Porta 60 H and Hawa Super (accessed 31 Oct 2026)
  4. I.S. EN 1527:2019+A1:2021, Building hardware: hardware for sliding doors and folding doors, requirements and test methods (NSAI standards store)

Keep reading.

  • Demountable partitions vs gypsum board

    A gypsum board partition is built on site in stages: framing, boards, taped joints and paint, and it is demolished when the layout changes. A demountable partition is made in a factory and assembled on site, so it can be taken down and rebuilt elsewhere. Line Systems PA 100 Opaque is designed as the modular alternative to gypsum walls.

  • Engineered demountable partitions vs tempered glass

    Tempered glass is a safety glass, heat- or chemically treated so that it cannot be cut or drilled afterwards. A site-built partition uses tempered panes made to size and fixed on site. An engineered demountable partition is a tested system of profiles, glass, seals and doors that can be taken down and rebuilt when the layout changes.

Apply it to your project.

Bring the drawings. BSI will turn the principle into a specification for your building.

Enquire Email