Skip to content

Demountable partitions vs gypsum board

A gypsum board partition is built on site in stages: framing, boards, taped joints and paint, and it is demolished when the layout changes. A demountable partition is made in a factory and assembled on site, so it can be taken down and rebuilt elsewhere. Line Systems PA 100 Opaque is designed as the modular alternative to gypsum walls.

Published by BSI on 31 October 2026

How each wall is built

A gypsum board wall is assembled in place. A metal frame is fixed between floor and ceiling, boards are screwed to it, the joints are taped and filled, and the wall is painted. Each step is a site trade, and the result depends on workmanship. The board itself is a standardised product: in the Gulf, GSO EN 520 sets the characteristics of gypsum plasterboards, such as reaction to fire, flexural strength, impact resistance and thermal resistance. Sound insulation and fire resistance, though, belong to the finished wall, and they are tested on assembled systems.

A demountable partition arrives as finished components. Line Systems manufactures its walls in Sintra, Portugal, in a factory where the BIM drawing connects directly with the machines. On site, PA 100 Opaque panels clip and fix into place, with wood-panel finishes chosen from unlimited options, and the same clip-and-fix assembly lets the wall be dismounted again. The solid wall connects with Glass Skin, Glass Acoustic, Glass Slim and Line Systems doors in one wall run.

Side by side

Gypsum board and demountable partitions compared
AspectGypsum board partitionDemountable partition (Line Systems)
Where it is madeBuilt and finished on siteFactory-made components, assembled on site
FinishTaped, filled and painted on siteFinished panels: wood for PA 100 Opaque, glass for the glazed systems
When the layout changesDemolished and built againTaken down and rebuilt in the new layout
Glass and doorsSeparate products to coordinateGlass walls, solid walls and doors from one family
Acoustic evidenceRated per tested assembly; sealing on site mattersLab-tested walls; Rw given per tested configuration, with the report
InstallationSeveral site stages before paintAssembly of finished parts; Line Systems states Glass Slim installs 2–3× faster than most brands

Acoustics: compare tested build-ups

Neither a gypsum board nor a pane of glass has a sound rating of its own once it is part of a wall. What counts is the tested build-up. Laboratory tests to ISO 10140-2, adopted in the Gulf as GSO ISO 10140-2:2025, measure the airborne sound insulation of a wall, door or glazing in a facility where flanking sound paths are suppressed. The standard itself notes that its results do not apply directly to a finished building without accounting for flanking transmission and boundary conditions.

On site, workmanship matters. For walls around offices and meeting rooms, the WELL Building Standard (Feature 81, Sound barriers) asks for acoustically rated partitions to be sealed at the top and bottom tracks, for gypsum board seams to be staggered and for every penetration to be packed and sealed. A demountable system moves much of that work into the factory and into tested details. Line Systems walls are acoustically tested by official European laboratories, and BSI states Rw only per tested configuration, with the laboratory, report number and date. Compare that report with the report for the gypsum build-up you would otherwise use.

When each one fits

  • Gypsum board: fixed walls that will not change for the life of the fit-out, such as walls around cores, shafts and service rooms.
  • Demountable partitions: offices, meeting rooms and team areas whose layouts change, and leased floors where the tenant may move and take the walls along.
  • Both on one floor: fixed gypsum walls around the core, and a demountable system for offices and meeting rooms, with solid and glazed bays in one run.
  • Fire-rated walls: a fire-resistance rating belongs to a tested assembly. Whichever system you choose, ask for the test evidence for the exact build-up the wall needs.

Cost over the life of the fit-out

A per-square-metre comparison on day one leaves out the second and third layouts. With gypsum board, each change means demolition, a new wall, new finishing and the disruption of site work on an occupied floor. With a demountable system, the same walls are taken down and rebuilt. Line Systems holds ISO 14001 for environmental management and designs its systems to be demountable and reusable. BSI prices partitions from your drawings rather than from a per-metre list; the inputs that move a quote are set out on the Line Systems page, and the four systems are compared on the comparison page.

BSI represents Line Systems in the Kingdom, with specification support, shop drawings, supply, installation and after-sales from Riyadh, and can carry the partitions inside a wider fit-out and finishing scope.

Questions, answered.

Are demountable partitions more expensive than gypsum board?

It depends on the scope. First cost depends on the system, glazing, acoustic target, area, height, doors and finishes, so BSI prices from your drawings. Over the life of a fit-out, the difference is what happens at each layout change: a demountable wall is taken down and rebuilt, while a gypsum wall is demolished and built again.

Can gypsum walls and demountable partitions be used on the same floor?

Yes. One practical split is fixed gypsum walls around cores and service areas, and a demountable system for offices and meeting rooms. The junctions between the two are detailed in the shop drawings.

Do demountable partitions insulate sound as well as gypsum walls?

Compare tested build-ups, not materials. Both are rated per tested assembly, and both depend on junctions and seals on site. Line Systems walls are acoustically tested by official European laboratories; BSI states Rw only per tested configuration, with the laboratory and report number, and sends the report that matches your target.

Keep reading.

  • Engineered demountable partitions vs tempered glass

    Tempered glass is a safety glass, heat- or chemically treated so that it cannot be cut or drilled afterwards. A site-built partition uses tempered panes made to size and fixed on site. An engineered demountable partition is a tested system of profiles, glass, seals and doors that can be taken down and rebuilt when the layout changes.

  • What a partition's Rw rating means

    Rw, the weighted sound reduction index, is a single figure in decibels that rates how well a building element such as a wall, door or window stops airborne sound in a laboratory test. ISO 717-1 defines it from measurements made to ISO 10140-2. A higher Rw means better insulation, but it is not the performance of a finished room.

Apply it to your project.

Bring the drawings. BSI will turn the principle into a specification for your building.

Enquire Email