Skip to content

Curtain wall, structural glazing or window wall

A curtain wall is a glazed building envelope fixed to the structure: it must be stable in itself but does not carry the building. A window wall is glazing installed between the floor slabs, floor by floor. Structural glazing is a way of fixing glass rather than a wall type: the glass is bonded to its frame with structural silicone.

Published by BSI on 31 October 2026

Three terms, two different questions

Curtain wall and window wall describe where the façade sits in relation to the structure. Structural glazing describes how the glass is held. That is why “curtain wall or structural glazing” is not a real choice: a curtain wall can be structurally glazed, and ASTM's guide to structural sealant glazing applies it to windows, curtain walls and other framing systems alike.

Curtain wall

EN 13830, the European product standard for curtain walling, treats it as a kit used as the building envelope that must keep its own integrity and mechanical stability without contributing to the load-bearing capacity or stability of the main structure. Its requirements cover weather resistance, safety in use, energy economy and heat retention.

Curtain walls are built in two main ways. In a stick system, the vertical mullions and horizontal members are assembled piece by piece on site and glazed there. In a unitised system, modules arrive pre-assembled with their glass or infill, usually one storey high. Both are fixed to the floor slabs or columns through adjustable anchor brackets.

Structural glazing

ASTM C1401, the Standard Guide for Structural Sealant Glazing (2023 edition), describes structural sealant glazing as an application where the sealant does more than keep out air and water: it primarily provides the structural support and attachment of the glass to the window, curtain wall or other frame. The guide accepts only a chemically curing silicone sealant that is formulated, tested and marketed for structural glazing.

That makes the sealant a structural component. Its compatibility with the frame, glass and gaskets, its adhesion, and the conditions in which it is applied become engineering checks, and the guide includes an adhesion screening procedure for field-applied structural sealant.

Window wall

Window wall usually means a large area of glazing installed between floors, sometimes stacked vertically. The North American fenestration standard (NAFS) defines it as a non-load-bearing fenestration system in combination assemblies and composite units. It can be built from storefront framing, from stick or unitised curtain-wall sections set between the slabs, or from mulled window units. Because the glazing stops at each slab, the slab edges are covered separately, and slab edge covers are generally outside the window wall package.

Side by side

Curtain wall, window wall and structural glazing compared
AspectCurtain wallWindow wallStructural glazing
What it isGlazed envelope fixed to the structure, not load-bearing for the buildingGlazing installed between floor slabsA method of fixing glass with structural silicone
Relation to the slabsFixed to slabs or columns with adjustable anchorsSits between slabs; slab edges covered separatelyUsed within either system
Ways to build itStick or unitisedStorefront, curtain-wall sections between slabs, or mulled windowsDepends on the frame system
Main engineering checksWeather resistance, safety in use, energy economy, heat retention (EN 13830)Interfaces with slab edge covers at every floorSealant compatibility and adhesion (ASTM C1401)

Settling the choice at design stage

The choice is made in design, not on site. Five questions settle most of it:

  1. The look at each slab edge: continuous glass across the floors, or glazing with visible floor bands.
  2. Performance targets: thermal, solar and acoustic.
  3. The test evidence each system has for those targets.
  4. For structural glazing, the sealant supplier's compatibility and adhesion results for the actual frame, glass and gaskets.
  5. Installation access and programme: floor by floor, or across the whole façade.

BSI's façade scope covers curtain walls, windows, skylights, louvres, cladding and balustrades, set out under façades and curtain walls. Its design and engineering team takes the building envelope from concept to construction-ready drawings that are buildable, code-compliant and value-engineered, and the work runs under one PMO with ISO-aligned inspection and material traceability, described under PMO and QA/QC.

Questions, answered.

Is structural glazing a type of curtain wall?

No. It is a way of fixing glass. ASTM C1401 describes structural sealant glazing as an application where the sealant primarily provides the structural support and attachment of the glass to a window, curtain wall or other frame, so a curtain wall may or may not be structurally glazed.

What is the difference between a curtain wall and a window wall?

A curtain wall is a glazed envelope fixed to the slabs or columns that does not carry the building's loads. A window wall is glazing installed between the floor slabs, floor by floor, so the slab edges are covered separately. The choice affects the look at each floor, the details at the slab and the installation sequence.

Which sealant is used for structural glazing?

ASTM C1401 accepts only a chemically curing silicone sealant that is specifically formulated, tested and marketed for structural sealant glazing. Its compatibility with the frame and glass and its adhesion are engineering checks, and the guide includes an adhesion screening procedure for field-applied sealant.

Keep reading.

  • SASO and SABER requirements for lighting poles

    In Saudi Arabia, product conformity runs through SASO, the Saudi Standards, Metrology and Quality Organization, and its SABER platform, where products are registered and conformity and shipment certificates are issued. A street lighting supply has two parts to check: the steel pole and the luminaire it carries. Requirements change, so confirm them for each shipment.

  • Demountable partitions vs gypsum board

    A gypsum board partition is built on site in stages: framing, boards, taped joints and paint, and it is demolished when the layout changes. A demountable partition is made in a factory and assembled on site, so it can be taken down and rebuilt elsewhere. Line Systems PA 100 Opaque is designed as the modular alternative to gypsum walls.

Apply it to your project.

Bring the drawings. BSI will turn the principle into a specification for your building.

Enquire Email